KP58L

KP58S

‹ ›

KP58L HORIZONTAL CIRCULAR SAWMILL

Replacement for a band sawmill
Carefree operation, no problems with sawing tools
A simple saw blade grinder is sufficient
Single or double cut – untrimmed and trimmed boards, planks, prisms
Max. Log diameter 60 cm, max. Log length 12 m, max. cutting width 48 cm, max prism height 16 cm
Reliable cast iron motors 15 kW
Two 700 mm horizontal saw blades

Description

Parameters

COMPARISON

Download

KP58L Horizontal circular sawmill, from the company StrojCAD, is designed for longitudinal cutting of logs by a pair of horizontal saw blades for untrimmed and trimmed timber - boards, planks, prisms or finished blanks - pallet, parquet, and furniture. However, the most common use is for the production of building timber.

The KP58 is able to process logs up to 600 mm in diameter and up to 12 m in length. The clean cut is max. 450 mm. We supply KP58 circular sawmills in stationary versions with or without hydraulic equipment. A pair of saw blades provides solid performance with high stability, high timber accuracy and superior surface quality.

Horizontal saw blades

Cast iron 15 kW electric motors

Low operating costs, ease of use and low maintenance guarantee high productivity and cost-effective operation with a rapid return on investment in the machine. The sawmill does not require a special base for its installation, just a flat surface made of concrete or panels.

Basic versions of the KP58L are supplied with main electric motors 2 x 15 kW. To increase the power of the cut, the saw can also be ordered with electric motors 2 x 18.5 kW.

Since the saw blades cut into the centre of the log while sawing, the debris is thrown out, with minimal wear of the circular saw blades compared to other tools (band blade, frame saw). This results in a considerably longer lifetime of the saw blades and a much lower operating cost. Thus, a smaller supply of saw blades is sufficient for operation.

Maximum diameter of the processed log	600 mm
Minimum length of the log being processed	2 m
Maximum length of the log being processed	12 m
Saw blade diameter	700 mm
Minimum thickness of the last board	30 mm
Max Cut Size (Width)	480 mm
Maximum Cut Size (Height)	160 mm
Power of main electric motors	2 x 15 kW
Speed of main electric motors	1 500 ot./min
The power of the electric motor travels	2,2 kW
Cutting speed – infinitely adjustable	3 - 90 m/min
Change power	1,5 až 2 m³/h

Machine Name/Parameter	KP58L	KP58S
Maximum diameter of the processed log	600 mm	500 mm
Minimum length of the log being processed	2 m	2 m
Maximum length of the log being processed	12 m	12 m
Saw blade diameter	700 mm	450, 500 alebo 550 mm
Minimum thickness of the last board	30 mm	30 mm
Max Cut Size (Width)	480 mm	350 mm
Maximum Cut Size (Height)	160 mm	150 mm
Power of main electric motors	2 x 15 kW	2 x 15 kW
Speed of main electric motors	1 500 ot./min	2 900 ot./min
The power of the electric motor travels	2,2 kW	2,2 kW
Cutting speed - infinitely adjustable	3 - 90 m/min	3 - 90 m/min
Change power	1,5 až 2 m³/h	1,2 až 1,8 m³/h

Overview flyer
English	940 KB	Download
Bulgarian	1 MB	Download
French	1 MB	Download
Hungarian	980 KB	Download
German	1,1 MB	Download
Polish	1 MB	Download
Romanian	1 MB	Download
Russian	2,5 MB	Download
Slovak	1 MB	Download
Spanish	1 MB	Download
Italian	880 KB	Download

Product flyer
Angle sawmills	900 KB	Download
DKP6 Double Saw blade Sawmill	600 KB	Download
SCAD 700 Band Sawmill	380 KB	Download
Sharpeners	330 KB	Download

MACHINE CONTROL

The movement of the saw head into the cut is controlled by the frequency inverter. To increase operator comfort and change performance, we normally supply a saw with a computerized cut height adjustment.

Adjusting the timber dimensions is via the control unit directly on the display using the control unit.

Control panel

Hydraulic control panel

After cutting, and before moving the saw head to the beginning of the next cut, the saw blades are raised by a pre-set value to prevent them from rubbing backwards.

When the next thickness is selected, it is precisely adjusted without having to adjust the position of the saw blades to the previous cutting height.

HYDRAULIC LOG HANDLING

KP58L Circular sawmills without hydraulic log handling are supplied with clip-on clamps and folding supporting steady, necessary for trunk welding and sawing timber cutting.

Log loader for saw frame

"V" flipper with convergence function

Vertical Lift Clamp

Slide roller for longitudinal feed of the log

For hydraulic versions, standard hydraulic equipment consists of:

loader – used to load logs on a workbench that is 750 mm above the ground for hydraulic versions,
tilting hydraulic supporting steady –used to align log after being loaded onto a workbench and centre them, while providing double cuts also ensure perpendicular alignment to the working table,
log turner – single or double-arm, for convenient log handling, for turning when sawing, and suitable for bench positioning
clamps – a unique clamping system that perfectly fixes wood. It precludes its springing when sawing, and in that the chucks are also adjustable in height, they allow horizontal alignment of the log along its entire length while tightening the log to the machine bed,
scroll roller – to move logs along the frame length.

Single-arm log turner

Folding work steady

SEE OUR SAWS

IN ACTION

STROJCAD RECOMMENDS

DOUBLE-BLADE CIRCULAR SAWMILL

CIRCULAR SWING-BLADE SAWMILL