KP58L Horizontal circular sawmill, from the company StrojCAD, is designed for longitudinal cutting of logs by a pair of horizontal saw blades for untrimmed and trimmed timber - boards, planks, prisms or finished blanks - pallet, parquet, and furniture. However, the most common use is for the production of building timber.
The KP58 is able to process logs up to 600 mm in diameter and up to 12 m in length. The clean cut is max. 450 mm. We supply KP58 circular sawmills in stationary versions with or without hydraulic equipment. A pair of saw blades provides solid performance with high stability, high timber accuracy and superior surface quality.
Horizontal saw blades
Cast iron 15 kW electric motors
Low operating costs, ease of use and low maintenance guarantee high productivity and cost-effective operation with a rapid return on investment in the machine. The sawmill does not require a special base for its installation, just a flat surface made of concrete or panels.
Basic versions of the KP58L are supplied with main electric motors 2 x 15 kW. To increase the power of the cut, the saw can also be ordered with electric motors 2 x 18.5 kW.
Since the saw blades cut into the centre of the log while sawing, the debris is thrown out, with minimal wear of the circular saw blades compared to other tools (band blade, frame saw). This results in a considerably longer lifetime of the saw blades and a much lower operating cost. Thus, a smaller supply of saw blades is sufficient for operation.