UH 500
UP 700
 
 

UH 500 Circular Swing-Blade Sawmill

  • Best-selling circular swing-blade sawmill
  • Small machine with great cuts
  • Lowest operating costs per m³ of processed logs
  • Easy operation and maintenance, reliable operation
  • Production of precision sawn timber directly from logs with just one machine
  • Max. Log diameter 80 cm, max. Log length 12 m, max. Prism 20 x 20 cm
  • Reliable cast iron motors 15 kW or 18.5 kW
  • One-person operation
Description
Parameters
COMPARISON
Download

The automatic dimensioning allows you to quickly and accurately adjust the cut range.

Saw timber adjustments are made by moving the saw head in two axes using the control unit directly by selecting the display or recalling and value from the memory.

 

UH500

 

Control panel

 

UH500

 

Hydraulic control panel

 

 

The UH500 Circular sawmill standard is equipped with a fully automated cutting cycle:

  • Tilting the saw blade to a horizontal position
  • Cut back
  • Slowing and stopping the saw carriage at the end of the runway
  • Adjusting the cutting dimension
  • Forward horizontal cut
  • Tilting the saw blade to the vertical position
  • Slowing and stopping the saw head carriage
  • Selecting the next pre-set size as desired

Operator activity is maximally free of routine operations. The operator regulates the cutting speed and selects the cut dimensions depending on the quality of the wood, thus maximizing the efficiency of the wood mass.

 

The sawmill is equipped with clamping clamps as standard. Also available as optional accessories are trunk lifters to the trimming of the residual cut-outs.

 

UH500

 

Log loader for saw frame

 

UH500

 

Log turner with convergence function

 

 

UH500

 

Clamp with lifting cylinder

 

UH500

 

Slide roller for longitudinal feed of the log

 

 

However, hydraulic handling of logs (loading, clamping, turning, aligning and centring) will also help to increase yield and change performance in addition to ease of handling.

The universal "L" turner does not only serve to rotate the logs, but also to fit them appropriately on the clamping frame before clamping them. The turner allows you to lift the thinner end of the trunk or move it horizontally to position the trunk in its optimum position and compensate for its convergence, which has a major impact on timber quality and cut yield.


STROJCAD RECOMMENDS


AUTOMATED CIRCULAR SAWMILLS WITH SAWN TIMBER SORTING
       
DOUBLE-BLADE CIRCULAR SAWMILL